摘要
Backwash is the most effective method of alleviating membrane fouling. However, there are few reports on the quantitative effects of the removal rate of loosely bound and densely compressed foulants on the transmembrane pressure in the backwash process. In this study, a dual exponential model was established based on the rapid removal rate of loosely bound foulants and the slow removal rate of densely compressed foulants to predict the instantaneous transmembrane pressure (pbt) in the constant-flowrate cross-flow backwash process for a 0.1-μm polyacrylonitrile membrane fouled by a 3.11-g/L activated sludge suspension. The results revealed that the proposed model precisely predicted pbt under different backwash conditions. Moreover, the variations in pbt within the backwash process was divided into four stages according to the transition times. (1) Stage I was a coupling process dominated by the rapid removal of loosely bound foulants, (2) Stage II was a coupling process dominated by the slow removal of densely compressed foulants, (3) Stage III was a single process involving the slow removal of densely compressed foulants, and (4) Stage IV was a steady process involving not foulants removal. Backwash durations of 5–20 s and backwash strengths of 1.5–2 were determined as the suitable backwash windows. Finally, the applicability of the proposed model was validated across different membranes (R2 ≥ 0.9951), feed suspensions/solutions (R2 ≥ 0.9979) and multi-cycle backwash tests (R2 ≥ 0.9840). These results provide significant insights into the industrial backwash process.
| 原文 | English |
|---|---|
| 文章編號 | 139671 |
| 期刊 | Separation and Purification Technology |
| 卷 | 413 |
| DOIs | |
| 出版品狀態 | Published - 9 11月 2026 |
指紋
深入研究「Dual exponential model based on the fast/slow rate in the constant-flowrate backwash process」主題。共同形成了獨特的指紋。引用此
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver